10
OPTION PROGRAMMING
1. Turn the Ignition ON and press the Override/Program button 5 times.
2. After a short delay, the parking lights will flash 5 times, Siren 5 times, Horn 5 times and status LED will be on solid.
3. Within the next few seconds, press the Override/Program button [again] the number of times that corresponds to
the options chart below. Siren and/or optional horn should chirp for each press.
4. When you get to the desired option number, quickly press the appropriate button on the remote control according to
the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2 chirps/flashes for button 2,
3 for Button #3 and 4 for button #4. (See Chart below for option descriptions and values.)
5. Turn Ignition off. System chirps and flashes the lights 3 times on exit. When you are finished customizing options,
check operation.
PROGRAMMING OPTIONS CHART
* = Default Setting
Option
#
Option Description
BUTTON 1
LOCK
BUTTON 2
UNLOCK
BUTTON 3
AUX
BUTTON 4
SILENT
1.
Factory Horn Chirps / Pulses
Pulse with
trip only
Arm/Disarm Chirps
& Pulse with trip
Arm/Disarm/Warn
Chirp & Pulse w/ trip *
2.
Passive Arming ON & OFF
Passive Chirp Countdown
Ignition &
Last Door
OFF*
Ignition & Last Door w/
Chirp Countdown
Last Door
Only
3.
Passive Lock / Cust. Override
ON
OFF*
Custom Override
4.
Ignition controlled Locks
ON*
OFF
Ignition Lock Only
5.
10/60 Sec. Door Open Warning 5 Seconds
60 Seconds*
6.
Active Re-Arm (30 Sec.)
ON*
OFF
7.
Double Unlock Pulse
OFF*
ON
8.
Silent Arm/Disarm
(Chirp Defeat w/button 1 or 2)
OFF*
ON
9.
Parking Lights on with disarm
ON*
OFF
10.
Disarm with trunk pop
OFF
ON*
11.
N/A
N/A
N/A
12.
Door Lock Pulse Time
0.7 Sec.*
3 Sec.
13.
Type of Carjack Protection
ACTIVE*
PASSIVE
FULL-TIME
14.
Carjack Enable/Disable
DISABLE*
ENABLE
15.
Arm/Disarm with IGN on
(Does NOT Override Full time
Carjack function)
DISABLED*
ENABLE**
