OPTION PROGRAMMING
ELECTRONIC PROGRAMMABLE OPTIONS
1. Turn the ignition on
2. Wait at least (1) second, then press the override/program button the number of times that corresponds to the feature
you want to change. (See the list below) The siren will chirp once for each button press.
3. Press button #1 or #2 on the transmitter to change the option. The siren will chirp once for Button #1 or twice for
Button #2 to confirm programming.
PROGRAMMING OPTIONS CHART
Option # Option Description
Press Button
#1
Press Button
#2
1
Passive Arming
ON*
OFF
2
Auto Lock with Ignition
ON*
OFF
3
Silent Arm/Disarm (Button1)
ON
OFF*
4
Doors Lock w/Passive Arm
ON*
OFF
5
Lights on with disarm
ON
OFF*
6
Active Re-Arm
ON
OFF*
7
Disarm with Remote Output 1
ON*
OFF
8
Remote Output 2/MAP Switch
MAP
Rem. Out 2*
9
Door Open Warning Delay
8 Sec.*
60 Sec.
10
Vehicle Assignment
VEH #1*
VEH #2
11
Double Unlock Pulse
ON
OFF*
*
= INDICATES THE FACTORY PRESET SETTING. SEE OPTION DESCRIPTIONS BELOW
1. PASSIVE ARMING
This option controls the Passive (Automatic) Arming feature. If ON, arming will occur 30 Seconds after the ignition is
turned off and the last door has been closed. The LED will begin flashing rapidly while counting down. If a door is
reopened, the system will wait (LED solid) for the door or zone to close before arming. The unit will chirp once and
flash the lights once. Doors will lock if passive locking is selected. Factory default setting is ON.
2. AUTOLOCK/UNLOCK
Controls whether the doors will automatically lock when the ignition is turned on and will unlock when the ignition is
turned off.
Doors will not lock if they are open to prevent locking the keys in
. Factory default setting is ON
3. SILENT ARMING /DISARMING (NO CHIRPS WITH BUTTON #1 ARM/DISARM)
With this feature, the system can be programmed to Arm and Disarm without the siren chirp. Flashing parking lights
will be the only Arm/Disarm confirmation. The Factory Default setting is OFF.
