13
MANUAL TRANSMISSION MODE (Option 11)
MANUAL TRANSMISSION EXIT PROCEDURE (Option #11-1, 11-3 & 11-4)
This system features a Manual Transmission Mode. When exiting the vehicle, there is safety check out
procedure required for the manual transmission mode to work. There are 3 choices of operation,
1.
Option 11-1:
With engine running and vehicle in neutral, set parking brake, then press “KEY”
Icon on
transmitter. The remote starter will turn on and take over operation of the vehicle. Press lock button after
closing last door to finish exit procedure (same as steps
a, b, c and d
below).
2.
Option 11-3:
With engine running and vehicle in neutral, set parking brake, the remote starter will turn on and
take over operation of the vehicle.
a.
Remove key, exit vehicle (remote starter unit must “SEE” door opened, then closed with engine
running).
b.
Press Lock button within 10 seconds of closing door to “Arm with Idle Down” (engine stays running).
Press Lock a 2
nd
time to cancel “Idle Down” (engine turns off) and set up Manual Transmission Mode.
c.
Press Lock button after 10 seconds to Arm system, lock the doors and shut down the engine. From this
point, you can remote start the engine unless a door is opened.
d.
Press the Remote Start Button after closing door to set up Manual Transmission Mode without Arming
Alarm System.
3. Option 11-4:
With engine running and vehicle in neutral, set parking brake, the remote starter will turn on and
take over operation of the vehicle. Remove Key and exit vehicle. When the last door of vehicle is closed, the
engine will turn off in 2 seconds and set up Manual Transmission Mode. You can arm the alarm system to
lock doors and protect vehicle.
TURBO TIMER in Manual Transmission Mode:
For Turbo Timer, press brake pedal before setting parking brake, then press the Remote Start Icon (requires Turbo
Timer Option # 22). After exiting vehicle, press lock button to set Manual Transmission Mode. The engine will
remain running for the Turbo Timer setting (1, 3 or 5 minutes). Turbo timer does not work with option 11-4 selected
REMOTE PANIC (Optional, horn must be connected)
For personal safety this unit now includes a panic feature. To sound the vehicle car horn, press the Lock Button on
the remote for more than 2 seconds. The vehicle horn will honk along with flashing parking lamps for 1 minute.
Reset Remote Panic by pressing either the lock or unlock button.