6
2).BLACK WIRE: CHASSIS GROUND
Connect this wire to a solid, metal part of the vehicle's chassis.
3).GREEN WIRE: REVERSE LIGHT SWITCH WHEN VEHICLE
IS IN REVERSE
Connect this wire to the wire from the reverse light switch that is
12 volts (+) while the vehicle is in reverse.
3. Install the mobile phone hands free seat
1) Select a suitable and convenient location for the mobile phone.
Clean the selected location.
2) Tear off the adhesive tape on the back of the hands free seat. Press
seat tightly on to the selected surface for 30 seconds till the two surfaces
are tightly glued. (See Figure 4 and Figure 5)
NOTE: Make sure the two surfaces are glued tightly!
3) Clean a place on the back of the cell phone, keeping it dry. Remove
the adhesive tape of the rounded metal sheet and stick it to the
selected place on the back of the cell phone.
NOTE: Do not attempt to move the phone within 24 hours after gluing.
CAUTION: The rounded metal sheet can only be glued once, so be
sure it is at the right place!
4. Illustration for Connection
Connect the mirror cables, adapter, mobile pone and power cables follows
the fig.4 illustration for connection.
7
