5
GB/IE
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it. Carefully read the
following operating instructions.
Use the product only as described and only for
the given areas of application.
Keep these instructions safe. When passing the
product on to a third party, always make sure
that the documentation is included.
Scope of delivery (Fig. A)
1 x table, folding with carrying handle
4 x stool, folding
1 x instructions
Technical data
Dimensions:
Table: approx. 120cm x 60cm x 70cm
(L x W x H),
Stool: approx. 34cm x 42cm x 40cm
(L x W x H),
Folding set (four stools in table):
approx. 60cm x 10cm x 60cm
Weight: approx. 7.9kg
Max. load:
Stool: 100kg
Intended use
The item is not intended for commercial use.
The item is intended for camping and leisure
activities.
Safety notice
Important! Please read the assembly
instructions carefully and keep them for
future reference!
Danger to life!
• Never leave children unsupervised with
packing material. There is a risk of
suffocation.
• The product is not a climbing toy or any other
toy! Ensure that persons, particularly children,
do not mount or pull themselves up with the
product. The product can tip.
Danger of injury!
• Ensure that the item is properly stable before
use!
• Place the item on level ground.
• Mind fingers when folding together/out.
There is a risk of injury through crushing.
• Ensure that the item is completely folded out
before using.
• Check the item before each use for damage
or wear.
• When using indoors, protect the floor from
possible damage by the table feet by placing
something under the feet.
• The item must only be used according to its
intended use.
• The maximum load may not be exceeded.
Folding out
1. Remove the item from its packaging and
place it with the carrying handle on top
(Fig. B).
2. Undo the latches on the folded table (Fig. B).
3. Carefully fold out the table and place it on
the ground (Fig. C).
4. Undo the Velcro fastenings and take out the
four stools.
5. Fold the inner table legs upwards until they
touch the bracket (Fig. D1) and adjust the
height of the table leg (Fig. D2).
6. Fasten the latches to stop the table folding
together (Fig. D3).
7. Turn the table around and place it as
required.
