10
GB/IE/NI
Changing the battery
CAUTION!
Follow these instructions in order to avoid mechanical
and electrical damage.
Danger!
The article contains a battery.
If the battery stops working it can be changed.
1. Set the size adjustment system to a medium size. Pull the rotary
knob out of the size adjustment system and remove the small
thread wheel.
2. Loosen the three screws under the rotary knob using a suitable
screwdriver (not included in the scope of delivery) (figure E).
Remove the base and take the battery compartment out. Carefully
remove the empty battery from the battery holder (figure F).
3. Exchange it for a new battery.
Note:
Pay attention to the plus and minus poles on the battery and
that it is inserted correctly. The battery must be fitted entirely inside
the battery holder.
4. Replace the battery holder in the rotary knob. Replace the base
and tighten the three screws. Place the thread wheel on the rotary
knob as shown. Please ensure that the three pins on the rotary
knob are positioned in the slots on the thread wheel (figure G).
Insert the rotary knob back on the size adjustment system.
Important:
When you insert the rotary knob please ensure that the
size adjustment system is set to a medium size as it is not possible to
re-attach the rotary knob otherwise (figure G).
Summary of Contents for 277838
Page 2: ...1 2 5 4 8 7 6 3 A C D G E F B ...
Page 50: ...52 ...
