Crivit FW-4588, Instructions For Use Manual

7

GB/IE

 Congratulations! 

With your purchase you have decided on a 
high-quality product. Get to know the product 
before you start to use it.  

Carefully read the following instructions 

for use.  

Use the product only as described and only 
for the given areas of application. Keep these 
instructions safe. When passing the product 
on to a third party, always make sure that the 
documentation is included.

Package contents 

1 x  chain whip (1)
1 x   bearing spanner, e.g. for Hollowtech II, 

compatible bearing shells (2)

1 x  pedal wrench (15mm) (3)
1 x  Allen key, 8mm (4)
1 x  attachment holder/puller (5)
6 x   Allen key 2 / 2.5 / 3 / 4 / 5 / 6mm  

(4 /5 / 6mm with spherical head) (6)

3 x  tyre lever (7)
1 x  chain rivet tool for 6 - 10 gears (8)
1 x   spoke spanner (9/10/11/12/13/ 

14/2x 15) (9)

1 x  square crank puller (10)
1 x   star cap tool for Hollowtech II chainsets (11)
1 x   cassette removal tool for Shimano HG (12)
1 x  T25 Torx spanner (13)
1 x  tool case 
1 x  instructions for use

Technical Data

Dimensions: approx. 28.5 x 21.3 x 6cm  
(L x W x H)
Weight: approx. 1850g

 Date of manufacture (month/year):  

01/2019

Intended use 

This item is a bicycle tool case for private use. 
The item is intended for simple repairs and does 
not replace specialist tools.

Safety Instructions

Life-threatening hazard!

•  Never leave children unattended with the pa-

cking materials. There is a risk of suffocation!

  Risk of injury!

•  The item contains sharp components. Be care-

ful not to injure yourself! 

•  Pay special attention to your fingers when 

flipping the case open and shut. There is a risk 
of injury from crushing.

•  Check the item for damage or wear before 

each use.

•  Caution! Not suitable for children under 36 

months. Risk of suffocation and choking due to 
small parts that can be swallowed or inhaled!

Use

Removing the cassette (Fig. E)

1.  Remove the back wheel of your bicycle. To do 

this, undo the quick release or alternatively, 
undo the nuts. 

2.  Put the cassette removal tool (12) into the 

closure ring of the cassette (Fig. E). 

Note:

 Take note that the removal tool must fit 

your cassette. Depending on the manufacturer, 
you may possibly require a different removal 
tool each time.
3. Put the chain whip in parallel around the 

sprockets of the cassette.

4.  Insert the Allen key (4) with the attachment (5) 

into the cassette removal tool (12) and loosen 
the closure ring.

5.  First unscrew the closure ring. Then remove 

the cassette.

Removing the pedals (Fig. C)

1.  Unscrew the left pedal in a clockwise direc-

tion using the pedal spanner (3). 

2.  Unscrew the right pedal in an anti-clockwise 

direction using the pedal spanner (3).

Note: 

Grease the pedal thread before reinstat-

ing the pedals.