Crivit REK 230 E3
English - 13
8.3. Cleaning
DANGER!
Disconnect the connecting cable before
cleaning the power source. There is a risk of electric shock!
DANGER!
In order to avoid risk, ensure that no liquids
enter the lid.
Remove the lid for cleaning by opening it as far as it will go and then pressing it from the right rear
recess.
To clean the lid, use a slightly damp cloth and never use solvents or cleaning agents that react with
plastics.
Clean the inside of the cool box using detergent and then clean water. Dry the cool box
thoroughly.
After cleaning, insert the lid again by bringing it into an upright position to the cool box. Now first
insert the lid into the left opening and then press it into the right recess.
9. Storing the device when not in use
If you do not want to use the cool box for a long period of time, please remove all items from the
cool box. Disconnect the cool box from the mains and store the connecting cable in the cable box
[4]. Make sure that the cool box is stored in a clean, dry place away from direct sunlight. Allow the
lid to stay open when storing the cool box to ensure good ventilation. The lid can be fixed open
using the locking mechanism [7].
10. Troubleshooting
The cool box doesn’t seem to be working.
Check whether the cigarette lighter socket connection [1] is plugged into the cigarette lighter
socket correctly or the plug is correctly inserted into the power socket.
In 12 V mode: Turn on the ignition of your vehicle, as some vehicles will only power the
cigarette lighter socket when the ignition is on.
In 12 V mode: The fuse is faulty. Change the fuse: When doing so, refer to Section “8.2.
Replacing the 12 V fuse”.
The cool box is not chilling properly.
Place the cool box in a cooler place. When doing so, make sure that the cool box is not
exposed to direct sunlight.
Summary of Contents for REK 230 E3
Page 1: ......
Page 2: ......
Page 3: ...V 1 14 English 2 Magyar 17 Slovenščina 32 Česky 47 Slovenčina 62 Deutsch 77 ...
Page 94: ......
