Crivit ST-2466, Instructions For Use Manual

11

Particular caution –  

Risk of injury to children!

• Never allow children to use this product  
  without supervision. Instruct them on the
  correct use of the training equipment and  
  supervise them.  
  Only allow use if the mental and physical de- 
  velopment of the child permits the use.  
  This product is not suitable for use as a toy.

 Hazards through wear

• The article may only be used in perfect  
  condition. Check the article for damage or  
  wear before each use. The safety of the sling  
  trainer can only be guaranteed if it is 
  examined regularly for damage and wear. 
• Only use original replacement parts. 
• Protect the product from extreme temperatures,  
  sunlight, and moisture. Unsuitable storage and  
  use of the article can lead to premature wear  
  and possible fractures, which can lead to  
  injury. 
• Do not attach the product to objects with 
  sharp edges, e.g. door hinges. Nylon will tear  
  if it rubs against sharp edges. 
• Do not saw! Sawing movements lead to  
  premature wear. 
• Examine the article regularly for damage or  
  wear. Discontinue use of the product if
  damage is found.

Beware of material damage

• Never allow the sling trainer to fall or to  
  rebound against the door as this could cause  
  damage to the door. 

Assembly instructions

• Select a training area with dimensions of  
  approx. 3.00 x 1.80m (L x W). 
• Attach the sling trainer at a height between  
  1.80 and 2.30m. 
• Only train on a level, non-slip surface.
• Only mount the sling trainer on doors that  
  open outwards (i.e. away from you) (figure B). 
• Lay the anchor over the top of the door in the  
  centre (figure B).
• Lock the door securely.

• 

 Caution! Risk of injury! 

  Always lock the door! 

• Use the door sign that is included with  

  the product!

• Make sure the door that you attach the 
  anchor on the sling trainer is stable and  
  robust, and that it can support your body  
  weight and that the anchor is securely 
  attached. Pull hard on the bands a few times  
  to test this (figure C). 

Assembly/use of the additional 

snap hook

Use the additional snap hook (10) to attach the 
suspension trainer to branches, hooks, or to the 
extension belt (9) (figure F). Remove the door 
anchor from the loop in order to do this.

 Warning! 

Always test the load-bearing 

capacity of the attachment points in order to 
make sure that there are sufficient safety mar-
gins. There is a risk of serious injury if this is not 
adhered to. 

Use of the extension belt (figure A3)

You can use the extension belt to attach the 
suspension trainer outdoors around trees or 
branches with a large diameter. To do this pull 
the extension belt through the last anchor loop 
and put the extension belt around the tree or 
branch. Attach the end of the extension belt to 
an anchor loop using the snap hook so that the 
suspension trainer is firmly attached around the 
tree or branch. 

Shortening and lengthening 

the sling trainer 

Note: Before making adjustments 

always ensure that the bands are not 

twisted!
Shortening: 

1. To shorten a strap take a firm hold on a belt  
  strap (5) on the suspension trainer.
2. Use your thumb on one hand to press down  
  the adjustment clasp (3) on the belt strap and  
  take the adjustment loop (4) in your other  
  hand. 

GB