Step 3: Make sure that tether hook
is securely attached to the anchorage
fitting.
Step 4: Pull the strap tightly. The
color of the indicator on tether strap
adjuster should be completely green.
Step 5: Place the child in the child
restraint and check whether the
shoulder belt guides are at proper
height (see 4.5).
Position shoulder belt through
shoulder belt guide, pass waist belt
through lap belt guidings. Fasten
buckle and pull the vehicle belt
to tighten.
with forward-facing mode
Step 2: Pass the waist belt over lap
belt guiding through the child’s seat
as shown in the picture.
Step 3: Fasten the vehicle buckle tongue into the buckle and make sure that you have hear a “click”.
Recheck whether the seat buckle is locked correctly and pull the seat belt to ensure it is tight and secure.
Check whether the shoulder harnesses are at the proper height.
with forward-facing mode
Make sure that you have hear a “click”
and the color of ISOFIX indicators
show GREEN.
Step 2: Push the child seat towards
the car seat backrest , check the
ISOFIX release button again and
ensure the color of ISOFIX
indicators show GREEN.
ISOFIX and top tether.
