4
APPLICATIONS
•
Piers, pre-cast beams, foundations, stairs, walls, floors, slabs, panels, floor stumps, footings
and fence posts.
FUNCTIONS & CONTROLS
•
The machine is controlled by an ON/OFF switch and a throttle lever.
•
The engine is 4-stroke, only use unleaded petrol.
MECHANICAL HAZARDS
•
Do not operate the machine unless all protective guards are in place.
•
Keep hands and feet clear of rotating and moving parts to avoid injury.
•
Ensure that the motor is in the OFF position and the spark plug lead is disconnected before
removing the guards or making adjustments.
•
Do not leave the machine with the engine running, while it is unattended.
•
Exercise care when operating the unit. Exposure to vibration or repetitive work may be
harmful to hands and arms.
•
Do not hold the vibrator shaft while in operation. Hold the unit with both hands on the
handles provided and use the shoulder strap to help support the unit.
•
Never stand or place your foot on the vibrator head while in operation.
•
Ensure that any repairs to the motor and machine are carried out by an authorised service
agent.
NOISE HAZARDS
•
Excessive noise can lead to temporary or permanent loss of hearing.
•
Wear an approved hearing protection device to limit noise exposure, as required by
occupational health and safety regulations.
ADDITIONAL HAZARDS
•
Slips, trips and falls are a major cause of serious injury or death.
•
Avoid loss of balance by starting the unit on a flat, level surface and only pick up when it is
idling.
•
Beware of uneven or slippery work surfaces.
•
Exercise care when working in the vicinity of unprotected holes or excavations.
Summary of Contents for PV45HRN
Page 11: ...11 NOTES ...