FMUX/S-4E1-E2 Multiplexer
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567
Copyright © 2007 Cronyx
8
Receiver signal level ...................................... 0 to -2.8 dB, or
2.6 to -5.6 dB, or
3.6 to -6.8 dB,
set from the console
Permitted cable length .................................... 0 to 170 m, or
150 to 350 m, or
200 to 400 m
(for the ATT734A cable),
set from the console
Overvoltage protection................................... TVS
Overcurrent protection ................................... Fuse
Emergency alarm interface
Connector type ............................................... DB-9 (female)
Relay contact type ......................................... Up to 600 mA
Relay contact voltage ..................................... Up to 110 VDC or 125 VAC
Console port
Interface type, ................................................ RS-232 DCE connector, DB-9 (female)
Data transfer protocol .................................... Asynchronous, 9,600 bit/s,
8 bits/character, 1 stop bit, no parity
Modem signals................................................ DTR, DSR, CTS, RTS, CD
SNMP management port
Interface type ................................................. Ethernet 10Base-T
Connector....................................................... RJ-45
Diagnostic modes
Loops ............................................................. Local, remote
Error rate control............................................ Built-in
Management................................................... over the RS-232 management port,
over SNMP (for '-SNMP' models), or
from a remote device
