11
TURNING THE COOLING SYSTEM ON AND OFF
You can disable the cooling system in your refrigerator by pressing the
On/Off button located on the left side of the temperature control
panel. To ensure that you do not accidentally turn off the cooling system, the button does not work unless you press and hold it for three
seconds. Once you disable the cooling system, all refrigeration to the freezer and fresh food compartments stops. To turn the cooling
system back on, you must again press and hold the
On/Off button for three more seconds.
TEMPERATURE CONTROLS
AIR FILTER INDICATOR & STATUS LIGHTS
Your refrigerator’s air filter needs to be replaced from time to time. You can monitor the need for replacement by referring to the status
light while the air filter is “ON”. To turn on the air filter, press the “Air Filter” button. To turn off the air filter, press the “Air Filter” button. To
RESET the air filter, press the “Air Filter” button and hold for 3 seconds.
Cooling System On/Off Button
Indicator Lights
RESPONDING TO ALARMS (Audible Tones & Indicator Lights)
Your refrigerator’s control system can convey the following information through audible tones and the alarm indicator lights.
NOTE
Pressing the
On/Off button on the control panel disables your refrigerator’s cooling system but does not disconnect power to lights
and other electrical components. To turn off power to your refrigerator you must unplug the power cord from the wall outlet.
Each time you make settings on the control panel, a single audible tone acknowledges your input.
Door
Ajar
Flashing
Green
Freezer or refrigerator door has
been open for over five minutes.
Close door to disable
and reset alarm.
Air Filter Status Light (not available on all models)
Green
Filter OK.
Yellow
Air filter is about 80 percent used. Please order new one.
Red
Air filter is 100 percent used. Please change now.
