5
INSTALLATION
Hinge
Flange
Set Screw
(some models)
Door Stop
Flange
Hinge
Open Door
7/16” Wrench
and 3/32” Hex Key
(some models)
To level the doors using the adjustable lower hinge:
3 If the freezer door is lower than the refrigerator door, raise
the freezer door by turning the adjustment screw clockwise
using a
7
/
16
inch wrench. (See illustration.)
4 After leveling, verify door stop contacts lower hinge and
top of door does not contact upper hinge through full
movement of door (from fully closed to fully open).
5 Reinstall set screw, locking the door height.
1 Before leveling either door, remove set screw that locks
door height into position. (The door cannot be adjusted
without set screw removed).
2 If the refrigerator door is lower than the freezer door, raise
the refrigerator door by turning the adjustment screw
clockwise using a
7
/
16
inch wrench. (See illustration.)
To level the cabinet using the front rollers:
1 Open both doors and remove the toe grille (see “Toe Grille
Installation and Removal” in the “Installation” section).
2
Close the doors and use a flat-blade screwdriver or
3
/
8
inch
socket wrench to raise or lower the front rollers.
3 Ensure both doors are bind-free with their seals touching
the cabinet on all four sides.
6 Replace the toe grille by fitting it into place (see “Toe Grille
Installation and Removal” in the “Installation” section).
NOTE
Some models will not have a set screw. For those models follow
steps 2 through 4.
