8
DOOR HANDLE MOUNTING INSTRUCTIONS
1. Remove handles from carton and any other protective packaging.
2. Position freezer handle end caps over upper and lower pre-installed
shoulder bolts (A) that are fastened into door, ensuring the holes for
the set screws are facing towards the refrigerator door.
3. While holding handle firmly against door, fasten upper and lower
Allen set screws (B) with supplied Allen wrench.
4. Repeat steps 2 and 3 to install refrigerator handle. Ensure the holes
for the set screws are facing towards the freezer door.
Freezer Upper End Cap
Refrigerator Lower End Cap
Refrigerator Upper End Cap
Freezer Lower End Cap
A
B
Ensure Handle Set Screws
are Facing Each Other
with Doors Closed.
B
B
A
B
A
B
A
B
NOTE
All set screws should be tightened and subflush (Allen set screw should be
seated just below the surface of the end cap) of handle end cap. The end
caps should be drawn tight to freezer and refrigerator doors with no gaps.
