7
Turntable Operation
Turntable Operation
Turn the unit on by pressing the POWER BUTTON
(13) located on the front panel.
1
Slide the FUNCTION SWITCH (8) to the
PHONO position.
2
Set the SPEED CONTROL SWITCH (34) to
the desired speed (33 1/3, 45 or 78 rpm). Place
the record on the turntable.
3
Pull the TONE ARM (33) slightly to the right
side until hear the “click” sound to activate the
TURNTABLE (31).
4
Move the TONE ARM (33) by hand to the record
and slowly lower it to the desired starting point.
Turn the VOLUME KNOB (9) to adjust the
volume to the desired level.
5
At the end of the record, the TONE ARM (33)
will stop automatically. You must return the
TONE ARM (33) to TONE ARM REST (35) by
hand.
Accessory: ADAPTER FOR 45 RPM
To play the 45rpm record, place the ADAPTER (32)
on the spindle.
