11
1
2
3
4
5
6
7
8
12
12
Getting Started
Control Locator
1.
TENSION ARM
2.
CENTER SPINDLE
3.
TURNTABLE
4.
SPEED SELECT SWITCH
5.
TONE ARM
6.
SIZE SELECT SWITCH
7.
TONE ARM REST
8. TURNTABLE SWITCH
9.
TONE CONTROL
10. ON/OFF VOLUME KNOB
11. AC ADAPTER
(placed in a white cardboard box, located
at one side of poly-foam)
12. TURNTABLE SUSPENSION SCREW
4
1
Plug A/C adapter into appropriate outlet.
Note: This product may be equipped with a
polarized alternating-current line plug (a
plug having one blade wider than the
other.) This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the
plug fully into the outlet try reversing the
plug, if the plug should still fail to fit, contact
your electrician to replace your obsolete
outlet. Do not defeat the safety purpose
of the polarized plug.
Getting Started
Unpacking
1
Remove packing materials from unit.
Note: Save all packing materials.
2
Remove plastic bag covering unit.
3
Remove tie from A/C adapter.
4
Open lid and remove styrofoam shipping
material from turntable.
5
Remove black tie-wrap from under the tone
arm.
6
Using your Fingers,Turn the Turntable
Suspension Screw (12) clockwise until it is all
the way down. Do not force it. This allows
turntable to float on its shock absorbers.
7
Gently pull out the rubber shipping pads.
5
Power Source
Set Up
Unwind the A/C power adapter (located in a
white box inside the packaging foam). Connect
the small end of the adapter to the back of the
turntable. Connect the other end to an A/C power
outlet.
A/C adapter
9
10
