11
Connecting Optional Equipment
There is no Power
1
The AC plugged is not well connected.
2
Check to see that the ON/OFF volume knob is
in the on position.
There is no Sound
1
Check the volume level by turning the volume
knob.
2
Make sure the LINE IN SWITCH is in the OFF
position if the LINE IN JACK is not being used.
Turntable will not work
1
Make sure the function switch is set to phono.
2
Try moving the tone arm to the right until you
hear a click.
3
Make sure the protective needle cover is
removed.
CD does not play
1
Check to make sure CD is inserted correctly
(label side facing up).
2
Check that the surface of the CD is clean
3
Make sure function switch is set to CD.
Troubleshooting
Auxiliary Input
1
You can connect external components to your
unit by using the Auxiliary Input.
2
Plug Auxiliary cable into the LINE IN JACK (29)
on the back of your unit.
3
Switch the LINE IN SWITCH (30) to the ON
position.
4
Plug the other end of the Auxililary cable into
the output jack on your desired external
component.
5
Check the volume level of your external
component.
6
See operators manual for correct operation of
the external component.
NOTE: When not using the Auxiliary Input, make
sure the LINE IN SWITCH (30) is in the
OFF position.