Operation :
1:Turn on the power to the cotrol box
2
：
there are four groups of witches for control different colours, the buttom for UP
or,
down can adjust the density of colour,
Warning:
1. Good heat emission condition may extend service life of the controller. Please put
the
product under the environment with good ventilation.
2. Ensure that the voltage complies with the requirement of voltage scope of the
product.
3. The line size used must bear the connected load and ensure that connection is
firm.
4. before debugging with electricity, ensure that all wire connection is correct to
avoid.
damage to lamps due to wrong wire connection.
5. If the failure takes place, don
’
t repair it by yourself. Please contact the
manufacturer.
