2.0 Installation
2.1 Mechanical - The 1584-116S consists of one RF printed circuit board (PCB) housed in a 1 RU (1 3/4 inch
high by 12 inch deep) chassis. A switching, +24 VDC power supply provides power. Connectors are type F,
female for the RF connections (BNC, female option -B or -D). The 1584-116S can be secured to a rack using
the 4 holes on the front panel. Figure 2.0 shows how the 1584-116S is assembled. J30 connects the DC voltage
from the power supplies to the PCB as shown.
2 1
J30
+24 PS IN
PIN 1, +24 VDC
PIN 2, GROUND
POWER
SUPPLY
FIGURE 2.0 1584-116S MECHANICAL ASSEMBLY
1584-116S Manual, Rev.C
Page 5
12/06/10
