2.6 Available Options (Models: 2015-XX, 2016-XX & 2017-XX)
LNB V 24 VDC, 0.4 Amps, for 2016-XX Downconverter.
2015-XX
2016-XX
L
External 10 MHz reference input for IF to UHF-, S-, C-, Ku- Agile Frequency Converters.
2015-XX
2016-XX
E/2
Connectors, 75 F-type RF, 75 F-type IF, for 2015-XX & 2016-XX Frequency Converters.
2015-XX
2016-XX
F
Option PWR - Pr15 dB Output @ 1 dB Compression for 2015-XX L-band Upconverter.
50 Ohm Connectors ONLY.
2015-XX
2016-XX
PWR
Option P48 – ±48 VDC Power Supply, for 2015, 2016 & 2017 Frequency Converters;
2115-XX & 2016-XX Block Converters.
2015-XX
2016-XX
P48
Option P24 – ±24 VDC Power Supply, for 2015, 2016, & 2017-XX Frequency Converters;
and 2115-XX & 2016-XX Block Converters.
2015-XX
2016-XX
P24
Connectors: RF = N/50 Ohm , IF = F/75 Ohm, for 2015 & 2016-XX Frequency Converters.
2015-XX
2016-XX
NF
Connectors: N-type, 50 Ohm RF & BNC 75 Ohm IF; 2015 & 2016-XX Frequency Converters.
2015-XX
2016-XX
N
Connectors: N-type, 50 Ohm RF & BNC 50 Ohm IF; 2015 & 2016-XX Frequency Converters.
2015-XX
2016-XX
M
Connectors, 75 BNC RF, 50 Ohm BNC IF, for 2015 & 2016-XX Frequency Converters.
2015-XX
2016-XX
K
J
Connectors, 75 F-type RF, 50 Ohm BNC IF, for 2015 & 2016-XX Frequency Converters.
2015-XX
2016-XX
Spectrum Inversion for 2015-XX Upconverters or 2115-XX Block Upconverters.
2015-XX
2016-XX
I
High Stability (± 0.01 ppm) internal reference, for 2015 , 2106, & 2017-XX
frequency converters and 2083-714A/-914A IF Translators.
2015-XX
2016-XX
2017-XX
H
External 10 MHz reference input, also supports insertion of either internal or external
10 MHz source on RF, models 2015-XX & 2016-XX Up & Downconverters.
2015-XX
2016-XX
E
All RF & IF Connectors, 50 Ohm BNC, 2015-XX & 2016-XX.
2015-XX
2016-XX
D
CE Certification Compliance, Documentation & Labeling for 2015-XX, 2016-XX and
2017-XX frequency converters and 2115-XX & 2116-XX block converters.
2015-XX
2016-XX
2017-XX
CE-Cert
2015-XX
2016-XX
Connectors, IF - 75 Ohm BNC, RF - 50 Ohm BNC for 2015-XX & 2016-XX
Frequency Converters.
C
2015-XX
2016-XX
Bandpass Filter Option #1, highly selective elliptic function bandpass filter
with multiple all pass delay equalizers.
BPF-1
Connectors: All RF & IF Connectors, 75 Ohm BNC, (2015-XX & 2016-XX).
2015-XX
2016-XX
B
Provides Automatic Gain Control (AGC) capability for 50 to 200 MHz Output via an add-on PCB
On-board SMA connectors allow insertion of bandpass filters (Option BPF-#) if required.
2015-XX
2016-XX
AGC/2
Provides Automatic Gain Control (AGC) capability on 70 MHz Output on
2016-XX IF Downconverter.
2016-XX
AGC
Option Description
Available
Product(s)
Option
Table 2.6.A Options Document
2015-26 Manual, Rev. 0
Page 18
12/09/10
