Cross Technologies 3116-66T42 Instruction Manual Download

Page: 1 / 16

Instruction Manual

Model 3116-66T42

Translator

September 2017, Rev. 0

MENU

EXECUTE

MODEL 3116

ROSS

ECHNOLOGIES INC.

IN LO FREQ REF.
3 9790.4 EXT

POWER

REMOTE

ALARM

TRANSLATOR

6.645>4.2 AUT0-E
G=-30 LO=2.4450

Data, drawings, and other material contained herein are proprietary to Cross Technologies, Inc.,

but may be reproduced or duplicated without the prior permission of Cross Technologies, Inc.

for purposes of operating the equipment.

When ordering parts from Cross Technologies, Inc., be sure to include the equipment
model number, equipment serial number, and a description of the part.

ROSS

ECHNOLOGIES, INC.

6170 Shiloh Road

Alpharetta, Georgia 30005

(770) 886-8005

FAX (770) 886-7964

Toll Free 888-900-5588

WEB www.crosstechnologies.com

E-MAIL info@crosstechnologies.com

Summary of Contents for 3116-66T42

















Search results

Summary of Contents for 3116-66T42

Reviews:

Related manuals for 3116-66T42

Brands by name

Popular brands

Cross Technologies 3116-66T42, Instruction Manual

Search results

Summary of Contents for 3116-66T42

Reviews:

Related manuals for 3116-66T42

Brands by name

Popular brands