15
Use the Sentry
S c a n a C o n t a c t C a rd
The following procedure shows how to scan data from a Contact card and verify the data with the Sentry. The
application in the illustration is a Crossmatch demonstration application. Your application can appear different.
1
Start the application.
2
Sign into the application The
Home
window appears with the
Main
menu for
the application displayed. The application in the illustration is a Crossmatch
demonstration application. Your application can be different.
3
Touch to select
Contact Card
. The instruction to insert the card and enter a PIN
appears.
4
Enter the PIN
5
Insert the card, with the picture visible, into the slot in the right-side of the
“The right side of the Sentry” on page 10
6
Enter the PIN.
7
Touch the
Submit
button.
8
The Sentry scans the card and the application displays the data from the card on
the screen. The workflow in the example application requires the operator to
verify the fingerprint.
Summary of Contents for Verifier Sentry
