15
17.
Inspect all other critical nuts and bolts to see that they are
secure even if you did not install them.
18.
Inspect for proper operation of brakes, clutch, and transmission
controls. Make sure indicator lamps, in center console, indicate the
appropriate gear position when selected. This is tested with key
on/engine off. Next, inspect headlight and brake light operation.
19.
Add fuel, turn fuel valve to ON position and inspect for leaks.
Install gas cap on fuel tank and run vent hose in front of tank, down and
away from rider to direct vented fumes below. Inspect engine oil level
in crankcase. Inspect for proper lubricant level in rear differential. See
Manual for proper grade and procedure.
Step#19-fig#1-Fuel vent hose routing
