7
Step#06-fig#2-Rear jack support
7.
Follow the same procedures outlined in steps 3 and 4 for
inflating tires, installing center caps and mounting wheels on the rear
of ATV. When finished installing wheels carefully lower ATV, release
parking brake and roll off metal shipping frame onto flat, level surface.
Reset the parking brake and perform the final wheel torque procedure.
Torque all lug nuts to 40 Ft/Lbs. using a torque wrench with the
appropriate increments. Proceed in a star or criss cross pattern to
assure uniform torque results.
Step#07-fig#1-Torque wheels nuts
