12
Following press <
ENTER
>, the system displays the bypassed zones.
While in the Bypass mode it is possible to bypass more than one zone, press
<
BYPASS
>, Bypass indicator lights up to indicate that the system is in bypass mode,
Add the
zone number (e.g. 03)
one or more zones, following press <
ENTER
> , the
Bypass indicator lights up to indicate zone(s) bypassed .
To un-bypass zones, press <
BYPASS
>, enter
zone number (e.g.07,13)
and press
<
ENTER
>.
Note
: Disarming automatically un-bypasses all zones.
How to use Chime
(
If enable by Installer)
To disable this function, press <
CHIME
> for 2 seconds, as shown below.
To enable this function, press <CHIME> for 2 seconds, as shown below.
Emergency Alerts
How to initiate Panic
Press simultaneously<
CHIME
>and <
CONTROL
> for 2 seconds.
How to initiate Medical Alarm
Press simultaneously <
CHIME
> and <
B
> for 2 seconds.
How to initiate Fire Alarm
Press simultaneously<
A
> and <
B
> for 2 seconds.
Generate Threat or Duress
If you are compelled to disarm the system under threat, you must enter the duress digit
before the user
’
s code to activate the automatic dialer. The duress digit shifts up your
usual code by one digit. If your code is 345 and 8 is your duress digit, than entering 8345
will modify your code. The modified duress code will disarm the system in a normal way,
but at the same time will activate the dialer silently to report a
“
duress event
”
without
arousing suspicion. (For details ask installer.)
Zone 3 Bypass
Zone 3
Chime OFF
Chime ON
www.msealarms.com.au
All manuals and user guides at all-guides.com
