Vortex FP Compact Installation & Operation Manual
1
Issue 1, January 2013
INTRODUCTION
The Crowcon Vortex FP Compact gas detection control system can be installed in Zone 1 or
Zone 2 hazardous areas, and is designed to monitor toxic and/or flammable gas detectors,
or fire detection devices. The system must be installed and operated in accordance with
these instructions.
WARNING
The equipment described in this instruction manual has mains
voltages applied to it. Ensure correct safety procedures are adopted
before working on the equipment.
The equipment described in this manual is designed for detection of
flammable and/or toxic gases. Ensure local safety procedures are
adopted before carrying out any maintenance or calibration work.
The equipment described in this manual may be connected to remote
alarms and/or shutdown systems.
Ensure that local operating
procedures are adopted before carrying out any maintenance or
calibration work.
© Crowcon Detection Instruments Ltd 2013
