Vortex FP Compact Installation & Operation Manual
6
Issue 1, January 2013
Figure 2 – System Dimensions
3. OPERATION & MAINTENANCE
3.1 A
PPLYING
P
OWER
Before applying power ensure that any control or shutdown systems to which the
Vortex FP Compact is connected are inhibited.
AC power supply cables must be connected to the AC terminals shown in Figure 1, with the
Live conductor connected to the fused terminal. A wiring diagram is shown on the next page.
If the equipment is permanently connected to a mains supply then a dedicated circuit
breaker must be included in the installation, to comply with EN 61010-1. The circuit breaker
must be easily accessible, must be marked as the disconnecting device for the Vortex FP
Compact system, and the ON and OFF positions must be clearly marked.
The circuit breaker must comply with the relevant requirements of IEC60947-1 and
IEC60947-3. The protective earth must not be disconnected even when the breaker is
activated.
