7
AUS:
1800 773 468
| NZL:
0800 111 960
| ASIA:
+800 7777 7733
| INT:
+61 7 3858 2581
FIGURE 2.
MEDIA pLAYER CONNECTION DIAGRAM
power
19V 2.1A Power Adaptor connects
here
Network
Network port for Ethernet cable
USB ports
For Servicing Only
.
Do not leave
a keyboard or mouse plugged in
during normal operation
Wi-Fi
Wi-Fi antenna connection
(Connecting router)
Video + Audio Output 1
(HDMI-2)
Primary channel for music video,
ambient visuals and digital
advertising; Embedded HDMI
audio
Video 2 (HDMI-1)
Service monitor only
Audio Output
3.5mm jack for audio output
power Button
Press this button to turn on the
Media Player
1
2
3
4
5
6
7
8
FRONT OF MEDIA pL AYER
8
3
REAR OF MEDIA pL AYER
2
1
3
5
6
7
4
5.
Connect power and Turn On the Media player
Plug the Media Player power pack into the
power Socket
1
and connect the other end to a
110/240v power source. Once plugged in, manually turn on the Media Player by pressing the
power Button
8
.
For further guidance, refer to the
EQUIpMENT GUIDE: Media player.
6.
Install Additional Nightlife Devices
(If supplied)
Any additional Nightlife devices that are included in this installation, like a Nightlife Tablet or
crowdDJ
®
Kiosk must be set up and powered on to complete the install before testing.
Refer to the respective installation guides for these additional devices
IMpORTANT
7.
Test the Media player
Now that the Media Player and any Nightlife-supplied devices are installed, it is critical to
complete post-installation testing.
The Manage My Nightlife app is used to test the system. For assistance with navigating the
Manager app, refer to
USER GUIDE: Manage My Nightlife Navigation
.
please turn to the next page to continue with testing.