23. Save these instructions.
25. If you do not use the product for a long time, you need to turn on the power and then release steam
for 3 minutes before leaving this product.
26.If you cut off power during steam release, residual heat will make product continue to release steam
for a length of time, the product will stop releasing steam immediately once you turn off steam knob
。
KNOW YOUR COFFEE MAKER
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with warm
water as follows:
1.
Pour water into water tank, the water level should not exceed the “MAX” mark in the tank. Then
replace the water tank cover.
Note: the appliance is supplied with a detachable tank for easy cleaning, you can fill the tank with
water firstly, and then put the tank into the appliance.
2.
Set steel mesh into metal funnel (no coffee in steel mesh).
3.
Place an jug on removable shelf. Make sure the steam control knob is on the OFF position.
Note:
the appliance is not equipped with jug, please use yourself jug or coffee cup.
4.
Connect to power source, Press the power switch “” .” one time, the red indicator is illuminated.
5.
Press the coffee switch , the pump will pump water, when there is water flowing out and close the
pump by pressing the coffee switch , press the steam switch selector and wait for a moment, the
appliance begins to be pre-heated until the inner lamp of coffee switch is illuminated, it shows the
pre-heating is finished. Press the coffee switc hand water will flow out.
6.
After water does not drop out any more, you can pour the water in each container out then clean
them thoroughly, now you can start brewing.
Note:
There may be noise when pumping the water for the first time, it is normal, the appliance is
releasing the air inside. After about 20s, the noise will disappear.
PRE-HEATING
To make a cup of good hot Espresso coffee, we recommend you preheating the appliance before
making coffee, including the funnel, filter and cup, so that the coffee flavour can not be
