3. Press down the ON/OFF button to
turn on the unit
, the power indicator (red) is illuminated.
4.
Press down the pump control button to the lower position which is the “
” position, make sure the
coffee/steam button is on the higher position which is the
position, the pump will pump water, when
there is water flowing out, close the pump immediately, pressing down the coffee/steam button to the
lower position which is the
position and waiting for a moment, the appliance begins to be heated
until the green lamp is illuminated, it shows the heating is finish.
5. Remove the frothing device from the steam wand.
6. Dip the steam wand into the liquid to be heated. Turn the steam control knob in anti-clockwise slowly to
start making steam.
7. When the required temperature is reached, you can turn the steam control knob to the minimum position.
8. Press and release the
ON/OFF button
to cut the power source off.
AUTOMATIC POWER OFF FUNCTION
1. After pressing power switch, if there is no any operation within 25 minutes, the unit will
power off automatically.
2. Press the coffee/steam button to lower position, if there is no any operation within 25
minutes, the unit will power off automatically.
3. The water pump can’t work more than 3mins.
CLEAN AND MAINTENANCE:
1. Cut off power source and let the coffee maker cool down completely before cleaning.
2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray and
removable shelf regularly then dry them.
Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.
3. Detach the metal funnel through turn it clockwise, get rid of coffee residue inside, then you can clean it
with cleanser, but at last you must rinse with clear water.
4. Clean all the attachments in the water and dry thoroughly.
