Crown CT29003HX, Original Instructions Manual

15

English

of battery pack may create a risk of fire when used with 

another battery pack�

•

Use power tools only with specifically designat

-

ed battery packs.

 Use of any other battery packs may 

create a risk of injury and fire.

•

When  battery  pack  is  not  in  use,  keep  it  away 

from  other  metal  objects,  like  paper  clips,  coins, 

keys,  nails,  screws  or  other  small  metal  objects, 

that can make a connection from one terminal to 

another. 

Shorting the battery terminals together may 

cause burns or a fire.

•

Under abusive conditions, liquid may be ejected 

from  the  battery;  avoid  contact.  If  contact  acci

-

dentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. 

Liquid ejected 

from the battery may cause irritation or burns�

•

Avoid unintentional switching on. Ensure the 

on / off switch is in the off position before inserting 

battery pack.

 Carrying the power tool with your finger 

on the on / off switch or inserting the battery pack into 

power tools that have the switch in accidents�

•

Do not open the battery.

 Danger of circuit�

•

In case of damage and improper use of the bat

-

tery, vapors may be emitted. Provide for fresh air 

and seek medical help in case of complaints.

 The 

vapors can irritate the respiratory system�

•

When the battery is defective, liquid can escape 

and come into contact with adjacent components

� 

Check any parts concerned� Clean such parts or re-

place them, if required�

•

Protect  the  battery  against  heat,  e.g.,  also 

against continuous sun irradiation and fire.

 There 

is danger of explosion�

WARNING! Read all safety warnings and 

all instructions.

•

Protect the battery charger from rain and mois

-

ture. 

The penetration of water in a battery charger in-

creases the risk of electric shock�

•

Do not charge other batteries.

 The battery charger 

is suitable only for charging lithium ion batteries within 

the listed voltage range� Otherwise there is danger of 

fire and explosion.

•

Keep  the  battery  charger  clean.

 Contamination 

may cause the danger of electric shock�

•

Check the battery charger, cable and plug each 

time before using. Do not use the battery charger 

when defects are detected. Do not open the battery 

charger yourself and have it repaired only by quali

-

fied personnel using original spare parts.

 Damaged 

battery chargers, cables and plugs increase the risk of 

electric shock�

•

Do not operate the battery charger on easily in

-

flammable surfaces (e.g. , paper , textiles , etc.) or 

in combustible environments.

 There is danger of fire 

due to the heating of the battery charger during charg-

ing�

Service

•

Have  your  power  tool  serviced  by  a  qualified 

repair person using only identical replacement 

parts.

 This will ensure that the safety of the power tool 

is maintained�

•

Follow instruction for lubricating and changing ac-

cessories�

Safety guidelines during power tool op-

eration

Before starting work

Do not spray substances that may damage 

the power tool� As a result, if the power tool 

is damaged, you will void your warranty�

•

Please read the manufacturer's instructions for 

the substances you intend to spray carefully to have 

a good understanding of their toxicity and the proce-

dures to handle them�

•

Follow the recommendations for spray residue dilu-

tion, storage, and disposal carefully� The wrong choice 

of chemicals or the wrong proportions in the solution 

preparation can damage crops and be hazardous to 

health�

•

If you intend to spray toxic substances, mix the so-

lution outdoors, away from the residential facilities, 

animal stables, food, and animal feed stores�

•

It is strictly forbidden to spray the following types of 

substances:

•

flammable substances (gasoline, solvents, etc.) - 

this can cause a fire or explosion;

•

corrosive substances (acids, alkalis, etc�) - this 

can damage the power tool parts;

•

dense substances (paints, oils, etc.);

•

food products�

•

Do not spray liquids that are hotter than the ambient 

temperature�

•

When filling the tank with water, never immerse the 

hose end or water tap in the tank�

While operation

•

The power tool must be operated only by the per-

sons who have been instructed to use it correctly or 

who can demonstrate that the tool can be used cor-

rectly�

•

The use of power tools by children or adolescents 

is strictly prohibited�

•

There should be no bystanders or animals with-

in 10 meters from the person using the power tool� 

When bystanders or animals approach, you must stop 

spraying�

•

Take special care when working in greenhouses, 

ensure adequate ventilation�

•

When spraying hazardous substances, to prevent 

inhalation or contact with them, be sure to use per-

sonal protective equipment (it is recommended to use 

protective coveralls with a hood, goggles, face shield, 

gloves, and closed shoes)� In case of chemicals con-

tact with your skin, wash it immediately with soap and 

running water� In case of chemicals contact with your 

eyes, rinse immediately with plenty of running water� If 

irritation persists, seek medical attention immediately�

•

When working, it is strictly forbidden to eat, drink 

or smoke - you can inhale or swallow particles of the 

sprayed substance, which can cause allergic reac-

tions, poisoning, and even death�

•

Do not direct the spray towards yourself, other per-

sons, or animals�

•

Consider the wind direction when working, and stand 

in such a way that the wind does not carry the sprayed 

substance onto you� Do not work in strong wind�

•

It is forbidden to work in the rain or leave the power 

tool in the rain or snow�