INSTALLATION & OPERATION MANUAL 10100 REV 0 (04/21)
PAGE
9
OF16
G
as
P
ower
T
ilt
S
killets
P
reventative
M
aintenance
P
reventative
M
aintenance
WARNING
Disconnect the power supply to the appliance before cleaning or servicing.
C
leaning
After each use, allow the tilting braising pan to cool and clean it. Keep exposed cleanable areas of the tilting braising pan
clean at all times. Do not get water in electrical box or any electrical component.
1. Thoroughly wash pan, pouring spout (See Figure 2), lid and exterior surfaces with detergent and warm water.
If necessary, soak pan to remove food that is stuck to pan surface. Rinse thoroughly and wipe dry with a soft
clean cloth.
2. Clean removable strainer and receiving pan support (see Figure 2) with detergent and warm water. Rinse thoroughly
and wipe dry with a soft clean cloth.
3. Clean around burner air mixers and orifices (at rear of burner) if lint has accumulated.
4. Visually ensure tube lighter ports (Figure 3) are unobstructed.
Figure 3
CAUTION
Do not use cleaning agents that are corrosive.
CAUTION
Operating, testing, and servicing should only be performed by qualified personnel.
