10
Protecting Your Digital Assets
TM
Ditto Network Tap Module User Manual
•
LiveCap Auto Start:
Set this value to ‘Enabled’ to turn on live capture as soon as the Network
Tap Module is powered on. Set this value to ‘Disabled’ if you want the user to choose when to
start the live capture service in the Browser Interface.
•
NetCap MTU:
If you are using the Network Tap Module on a network that’s configured to a
non-standard maximum transmission unit size (e.g. it uses jumbo frames), then set this field
to match that value. Most Ethernet LANs will use the standard MTU of 1500. The commonly
accepted range for a valid MTU is 68 to 65,535 as defined in RFC 791.
•
NetCap Link Speed:
Allows you to set the Ethernet connection speed throughput. In most
cases, ‘Auto Negotiate’ will work. If you experience problems staying connected, you may need
to change the speed to match what your network’s capabilities are.
4 TECHNICAL SPECIFICATIONS
Product Name
Ditto Network Tap Module
Ditto Family Compatibility
Ditto Forensic FieldStation, Ditto DX Forensic FieldStation
Data Interface Types &
Speeds
1000BASE-T EtherNet: up to 1 Gbps
USB 2.0: up to 480 Mbps
Supported Drive Types
External USB HDDs, SSDs and media card readers
Data Connectors
Two (2) 1000BASE-T Ethernet connectors
One (1) USB 2.0 connectors
External material
All-metal construction
Operating Humidity
5% to 95%, non-condensing
Power over Ethernet
PoE+ (30W)
Compliance
EMI Standard: FCC Part 15 Class A
EMC Standard: EN55024, EN55032
CE, RoHS
Product Weight
Standalone: 0.5 pounds (0.23 kg)
Product Dimensions
2.81in W x 4.94in L x 1.43in H (71.3mm W x 125.6mm L x 36.4mm H)
Technical Support
Your investment in CRU products is backed up by our free technical sup-
port for the lifetime of the product. Contact us through our website,
www.
cru-inc.com/support
or call us at 1-800-260-9800 or +1-360-816-1800.
