background image

PMS 711

2 cyan

85 magenta

76 yellow

10.25.12

CRU Mark

Page 9

11. Technical Specifications

Product name:

RTX220-3QR, RTX221-3QR, RTXS222-3QR

Data Interface 
and Speeds:

•  USB 3.0: Up to 5 Gbps
•  eSATA: up to 2400 Mbps
•  Dual FireWire 800: up to 800 Mbps
•  USB 2.0: up to 480 Mbps

Drive Types 
Supported:

3.5” SATA hard drives

RAID Levels 
Supported:

RAID 0 (striped) or RAID 1 (mirrored)

Shock 
Absorbing Bays:

Yes (RTX220-3QR model only)

Lockable Bays:

Yes

Power LED:

Yes

Access LED

Yes

Power Switch:

2 position: On / Off

Operating 
System 
Requirements:

•  Windows XP, Vista, Windows 7, Windows 8
•  Mac OS X 10.4 or higher
•  Linux distributions that support the connection        
     type

Power Supply:

Input: 100-240VAC
Output: 120 Watts

Cooling Fan

60mm exhaust fan

External 
Material:

All-aluminum construction

Shipping 
Weight:

8.5 pounds without drives, 11.5 pounds with drives

Dimensions:

(177mm W x 270mm D x 160mm H)

Compliance:

•  EMI Standard: FCC Part 15 Class A
•  CE
•  EMC Standard: EN55022, EN55024
•  RCM

Warranty:

3 Years

Support

Your investment in CRU products is backed up by our 
free technical support for the lifetime of the product. If 
you need to contact us for any reason, please visit 
cru-inc.com/support or call us at 1-800-260-9800 or 

+1-360-816-1800.

© 2013 CRU Acquisition Group LLC, ALL RIGHTS RESERVED. 

RTX™ and CRU™  are trademarks of CRU Acquisition Group, LLC and are 
protected by trademark law.

Product Warranty
CRU warrants this product to be free of significant defects in material and 
workmanship for a period of three years from the original date of purchase. 
CRU’s warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability
The warranties set forth in this agreement replace all other warranties. 
CRU expressly disclaims all other warranties, including but not limited 
to, the implied warranties of merchantability and fitness for a particular 
purpose and non-infringement of third-party rights with respect to the 
documentation and hardware. No CRU dealer, agent, or employee is au

-

thorized to make any modification, extension, or addition to this warranty. 
In no event will CRU or its suppliers be liable for any costs of procurement 
of substitute products or services, lost profits, loss of information or data, 
computer malfunction, or any other special, indirect, consequential, or 
incidental damages arising in any way out of the sale of, use of, or inability 
to use any CRU product or service, even if CRU has been advised of the 
possibility of such damages. In no case shall CRU’s liability exceed the 
actual money paid for the products at issue. CRU reserves the right to 
make modifications and additions to this product without notice or taking 
on additional liability.

FCC Compliance Statement: “This device complies with Part 15 of the FCC 
rules. Operation is subject to the following two conditions: (1) This device 
may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired 
operation.” 

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment. This equip

-

ment generates, uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment 
in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at this own expense.

In the event that you experience Radio Frequency Interference, you should 
take the following steps to resolve the problem: 
1) 

Ensure that the case of your attached drive is grounded. 

2) 

Use a data cable with RFI reducing ferrites on each end. 

3) 

Use a power supply with an RFI reducing ferrite approximately 5    

 

inches from the DC plug.

4) 

Reorient or relocate the receiving antenna. 

FOR OFFICE OR COMMERCIAL USE

Summary of Contents for RTX Secure 222-3QR










Reviews: