520 Express Series
10-5
Electrical
NOTE
For any troubleshooting information
other than given here, refer to the
individual component owner’s
manuals in the Skipper’s Kit.
DANGER
DANGEROUS VOLTAGES ARE
PRESENT AT THE REAR OF THE
AC/DC PANEL. THERE ARE NO
OWNER SERVICEABLE
COMPONENTS ON THE PANEL.
SERVICE MUST BE PERFORMED
BY A QUALIFIED SERVICE
TECHNICIAN.
CAUTION
DO NOT reset a circuit breaker
which has been automatically
tripped without first locating and
correcting the problem.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Electrical component will not
function
Circuit breaker in the tripped or OFF
position.
Weak or discharged battery.
Loose or broken wire connection.
If breaker is tripped, correct the problem and reset; otherwise turn
circuit breaker ON.
Charge battery.
Connect or repair wire as necessary. Install plug in outlet.
Lights do not come on or are dim
Circuit breaker in the tripped or OFF
position.
Weak or discharged battery.
Loose or broken wire connection.
Light bulb burned out.
If breaker is tripped, correct the problem and reset; otherwise turn
circuit breaker ON.
Charge battery.
Connect or repair wire as necessary.
Replace bulb. Handle bulb with caution.
Generator will not start
Master battery switch in OFF
position.
Turn master battery switch ON.
No power at AC outlets
Circuit breaker tripped or ground
fault circuit interrupter tripped.
Reset outlet and test. If reset button or light does not come on, DO
NOT use any outlets. Have circuit checked by qualified technician.
Downloaded
from
Cruisers
Owners
Forum
http://www.CruisersOwnersForum.com