background image

Ground Pounder GPV AMPLIFIERS

                             INDEX                                                                                       PAGE

Crunch is proud to introduce the finest high end car audio products available and would like to thank you for your 
continued support. The Ground Pounder Series range of products have been designed to a very high level of 
performance, with features unavailable in any other products. All of the amplifiers have variable crossovers built in, 
with added touches such as subsonic filter, bass equalization and a bass remote control module option that allows 
bass control from with in reach of the drivers seat.

To insure years of listening pleasure, all amplifiers have a built in diagnostic mode that will detect shorted speaker 
leads, low impedance, dangerous high temperatures, DC shorts and will shut down the amp to help prevent 
serious damage.

Amplifier Feature Descriptions..........................................................................................................................................................1

GPV700.2 / GPV1000.2  2-CHANNEL  AMPLIFIER  APPLICATIONS...........................................................................................2-3

Full range stereo  /  Full range mono / 2 way active with mono bass using two 2 channel models

GPV1000.4 / GPV1600.4  4 CHANNEL  AMPLIFIER  APPLICATIONS..........................................................................................4-5

4, 3 and 2 channel full range / 2 way active, with mono bass / 
front/rear high pass using a 2 channel model for mono sub bass

GPV2000.1 A/B CLASS 1 CHANNEL  AMPLIFIER  APPLICATIONS................................................................................................ 6
                Basic mono amplifier application

GPV3000.1D PRO D CLASS 1 CHANNEL  AMPLIFIER  APPLICATIONS........................................................................................ 7
                Basic mono amplifier application and linking instructions

Features and Specifications............................................................................................................................................................. 8
Setting Up Systems After Installation For Best Performance............................................................................................................. 9
Troubleshooting and Diagnostics....................................................................................................................................................10
Product Warranty............................................................................................................................................................................ 11

The contents of this manual may not be reproduced or copied with out the

written consent of MAXXSONICS USA, Inc.

Summary of Contents for Ground Pounder GPV1000.2
















Reviews: