2
1.
Before proceeding, eject disc(s) from factory
unit if present.
2.
Set parking brake and disconnect negative
battery cable to prevent any electrical short.
3.
Pry
off
glove box right trimpanel
to release
three (3) clips and remove trimpanel (Figure 1).
4.
Pry out all edges of
center vent panel
to
release thirteen (13) clips and remove vent
panel (Figures 2 & 3).
5.
Remove two (2) 7mm screws exposed by
removal of center vent panel (Figure 4).
6.
Pry
off
lower receiver/climate trimpanel
and
remove two (2) exposed 7mm screws
(Figure
5).
7.
Remove
rubber mat
in forward console tray
(Figure
6).
Continued on the next page.
019 0021
Factory Radio Removal
Copyright 2018 Crutchfield Corporation
FIGURE 6
1-800-955-9094
TECHNICAL SUPPORT
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
FIGURE 5
Glove Box Right Trimpanel
Glove Box Right Trimpanel
Center Vent Panel
Center Vent Panel
Lower Receiver/Climate Trimpanel
Lower Receiver/Climate Trimpanel
Rubber Mat
Rubber Mat