10
Before Using For The First Time
WARNING: Blade and disc attachments are very sharp. Use extreme care when handling
blades and disc. Failure to do so can result in personal injury.
1. Carefully unpack the Food Processor and remove all packaging materials.
2. Wash the processing bowl, lid with feed chute, food pusher, food pusher cup,
spindle, processing blade and reversible slicing/shredding disc in warm soapy water.
3. Wipe the Food Processor base with a soft, moistened cloth.
WARNING:
Never immerse the Food Processor base
in water or any other liquid.
4. Rinse and dry each part thoroughly before use.
Assembly Instructions
Base/Bowl Assembly
1. Before assembling and using the Food Processor,
make sure that the power cord is unplugged.
2. Place the base facing you on a dry, level surface.
3. Fit the spindle securely into the drive shaft.
(See Figure 3.)
4. Place the processing bowl onto the base. Position the handle
directly over the base/bowl interlock channel. (See Figure 3.)
5. Rotate the handle counter-clockwise; the handle will lock onto
the right side as the base/bowl interlock engages.
(See Figure 4.)
NOTE:
If the base/bowl interlock is not properly engaged,
the Food Processor will not operate.
Figure 3
Base/Bowl
Interlock Channel
Figure 4
