Crux Interfacing Solutions • 21541 Nordhoff Street, Unit C, Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.072419
4 of 13
R
INTERFACING SOLUTIONS
ACPBM-77Y
10. Unplug the 2-pin fiber optic cable
from the factory Quadlock connector.
11. Plug in the 2-pin fiber optic connec
-
tor to the ACPBM-77Y harness (Female
side).
12. Tap the Black GND wire from the
Smart-Play Power/Video harness to the
black Ground wire on the ACPBM-77Y
vehicle harness (Male Side).
15. Tap the RED ACC wire from the
Smart-Play Power/Video harness to the
green +12V output on the ACPBM-77Y
harness.
13. Tap the Yellow constant wire from
the Smart-Play Power/Video harness to
the Red constant wire on the ACPBM-
77Y vehicle harness (Male Side).
14. Connect the male 8-pin connector
from the ACPBM-77Y to the female
8-pin connector on the Power/CAN
harness.
*Make sure you use the correct Power/CAN har
-
ness for your vehicle trim (refer to NOTE on p.1)*
16. Plug the factory Quadlock connec
-
tor in to the male side of the ACPBM-
77Y harness.
17. Plug in the female side of the
ACPBM-77Y harness to the Headunit.
18. Unplug the PINK LVDS factory cable
from the Headunit.
Smart-Play Integration with Rear-View Camera Input for
E & F Series BMW Vehicles with CIC Infotainment Systems
