Crux Interfacing Solutions
6860 Canby Avenue, Suite 116,
Reseda, CA 91335
tel. #: (818) 609-9299
fax #: (818) 996-8188
continued
3.
Plug the 6-pin Audio Adaptor to the
main interface module.
4.
This allows you 2 Audio Inputs and 1
Audio Output.
1.
Connect the supplied GPS antenna to the
main interface. FAKRA connector is shown
for reference.
2. Menu options are available via the
menu buttons on the bottom side of the
interface module.
3. Insert the SD card to properly adjust the
screen position via the MENU buttons on the
main module.
4. Tap all the cross contacts on the
screen to calibrate the touch function.
5.
After calibrating the screen tap on the
middle of the screen to continue.
6.
6. Once the SD card has loaded you will
need to make sure the proper file is
selected. Tap SETUP icon .
7.
From the SETUP menu, tap on
NAVI SETUP.
8. Tap the GREEN FOLDER to browse the
storage card.
9. Select [Storage Card], then tap OK.
4 / 6
The GPS Antenna can either have
an SMA or FAKRA connector
.
rev.042817