URC-601 User Manual/
Εγχειρίδιο
Χρήσης
10
Note:
•
If no key is pressed within 30 seconds the red
light indication will blink twice and turn off.
•
During the learn process all buttons can be
programmed except from [LEARN], [
ΟΚ
]
[MACRO] [ALL OFF], and device mode keys.
6 If you have finished learning all the buttons you
want and you need store all the learned key data
press the
button. The red light indication on
the DVB-T
button will turn off.
Attention:
If after the completion of the learn process you
reprogram this particular device by putting a
different device code all stored data will be reset
and replaced with the new ones.
Keys that can not be programmed
when using the Learn function
feature.
[LEARN], [ALL OFF]
[OK]
[MACRO]
[DEVICE MODE KEYS]
Actions to verify correct programming
Once you have programmed the remote using the learning function check if all the
buttons are working according with your programming by trying to control the DVB-T
device.
Corrective Actions
If any of the buttons do not work properly, you can program those buttons again by
using the same process described above.
Note: Learn function for other devices
If you want to use the learning function for other devices use the above guide and
instead of DVB-T mode button choose another device button
and
continue with the same procedure.
Note:
If you want to program to control the sound of your TV by using the
button
luse the LEARN method and program the button
using the remote control of your
TV and learn the buttons that change the sound of your TV
.
With this, you can control
the sound of your TV without having to switch from another device to TV mode.
