21
9
Reset, in case IP has not been allocated to S-160 in Dynamic IP Setting, to go to Initial Value
and try again.
1) After checking Video in ‘
Video Check
’, then go to the next step.
2) Connect S-160 and LAN Cable (Cross Cable)
3)
Cable Connection and Network Setting should be done same as per‘
1. Installation and Video
Check
’.
4) Go to Network Setting Page of Administrator’s Page as per 4), 5), 6), 7) of ‘
Static IP Setup
’.
Pic. 3
―
7 Network Setting
5) Click on ‘Dynamic IP Address’ in ‘IP Setting’.
6) Click
‘Save’
Button.
7) Upon completion of setting, close the Web Page and find IP of S-160 in ‘IP Utility’
program provided with Proprietary Viewer (see ‘
5. Basic Use
’)
8) If IP found, S-160 has been given IP. But in case IP is not found, do re-set of [2-1] to go to initial
value because it has not been given IP, then re-start IP Setting. Once S-160 is given IP, remove LAN
Summary of Contents for S-160
