18 issue 5
Logs and driftwood layout
Fitting Logs or Driftwood Pieces
Note all the Log or Driftwood pieces
Have numbers on their Base
Fit the
Large Rear Log or Driftwood Piece No1
Behind the burner as shown in
Fig.18: 2
20:3
Fitting the granules
Important
the
granules
must not
Be placed onto the
Burner
or any part of
The
Ceramic Base Pad.
Ensure
no
granules fall onto the
Pilot
Carefully place the
granules
around
the front of the
Metal Air Guide
and around
the sides of the rear log. As shown in
Fig 18:3
Do not block air inlets on fire tray
20:4
Fitting Log or Driftwood No2
Fit
Log or Driftwood No2
at the left hand
Side ensuring the hole in the base locates
On to the metal peg at the front and it rests
In the groove in the
Rear Log/Driftwood
As shown.
Fig 18:4
AT THIS POINT PLACE 1 OR 2
BARK CHIP OVER THE CENTRAL FLAME SLOT AS
SHOWN
Fig 18:4
Fig 18:2
Fig 18:3
