crystal fires JEWEL CUBE, Users Installation & Servicing Book

WITH A TAPER IS AN EMERGENCY MEASURE ONLY AND THE APPLIANCE SHOULD 
BE SERVICED AS SOON AS POSSIBLE”.AND THEN PROCEED AS STATED IN 
PARAGRAPHS 2/7. 

IMPORTANT .THIS  APPLIANCE IS FITTED WITH AN OXYGEN DEPLETION SENSOR 
INCORPORATED  INTO THE PILOT BODY.SHOULD THE FIRE REEATEDLY 
EXTINGUISH ITSELF THEN SPECIALIST ADVISE SHOULD BE SOUGHT,AS THIS 
MAY INDICATE SPILLAGE INTO THE ROOM OF COMBUSTION PRODUCTS. 
 

OFF

PILOT
IGN

LOW

HIGH

GB/IE CAT1

2h

G20 

AT 

20mbar hot 

HEAT INPUT HIGH 6.9Kw LOW 4.1Kw gross

JEWEL DECORATIVE INSERT

JET CAT82/460 BRAY

CRYSTAL FIRES 7 D BECHERS DRIVE L9 5AY

THIS APPLIANCE MUST BE INSTALLED IN ACCORDANCE
WITH THE RULES IN FORCE AND USED ONLY IN A SUFFICIENTLY
VENTILATED SPACE .CONSULT INSTRUCTIONS BEFORE
INSTALLATIONS AND USE OF THIS APPLIANCE

FIG 1 

CLEANING 

BEFORE CLEANING ANY PART OF THE FIRE ,ENSURE THAT THE GAS IS 
TURNED OFF AND FIRE IS COOL. 
 
BLACK PAINT. 
USE ONLY CLEAN DAMP CLOTH ,DO NOT USE ANY CLEANING AGENTS 
 
BRASS TRIM 
USE BRASSO,ENSURING YOU REMOVE THE BRASS TRIM FROM THE 
APPLIANCE BEFORE CLEANING 
 

IMPORTANT 

THE PAINT AND BRASS FINISH ARE DURABLE BUT WILL  BE DAMAGED 
IF PLASTER,CEMENT,OR WALLPAPER PASTE COMES IN CONTACT WITH 
IT 
 

COALS AND CERAMICS 

IF FOR ANY REASON IT IS NECCESARY TO REMOVE CERAMIC 
PARTS,THEN BEFORE REPLACEMENT THE BURNER SHOULD BE 
CHECKED  THAT NO PARTICLES HAVE DEPOSITED ON THE BURNER 
AND IF NECCESARY VACUUM THEM CAREFULLY,THEN REFER TO 
INSTRUCTIONS FOR REPLACING CERAMICS. 
 
CERAMICS SHOULD BE CLEANED WITH A SOFT BRUSH 
 
 

issue 3 

14