4
Installation Instructions: Three Stage Filtration System
FIL
-
W300005
3.
Assemble the elbow fittings included with your kit. Be careful not to over tighten these
fittings. Note that the pre
-
filter and the post carbon filter fittings are 90
⁰
from each other
as shown below. This will help to prevent side loading on the fitting during the product
water connection step of these instructions.
4.
Your Crystal Pro is supplied with enough product water tubing for this installation. Cut the
zip tie and uncoil the tubing. Find the midpoint of the tubing and cut for the filter connec-
tion. Be sure to use the proper tubing cutter when making this cut and ensure that the
tubing is free of flash and cut square before using.
CAUTION: All connections must have the supplied locking clips installed
