24 | Crystal Screens Assembly and User Guide
3
Repeat fastening on the opposite
end of the frame as done in Step
2. Line up the screen holes with
threaded frame holes. Place a
pressure strip (V) over the screen
holes and fasten with Button-
head Socket Cap Screws (R). While
fastening make sure the crease of
the screen lines up with the top or
bottom edges of the frame.
NOTE: If the crease does not match
up, do not force it. Reexamine
the Spring Guide Assemblies
to be certain that each Thumb
Screw is adjacent to its respective
Jam Nut, and each Wing Nut has
been screwed to fully compress
the spring.
