Crystal Vision
VisionWeb
VisionWeb ‘Configuration/Labels’ page
In the example above, slots 1.04 and 1.06 have been labelled, as has the frame itself. Note
that the Configuration/Labels page shows 32 slots which is to provide slots for ‘virtual cards’. A
virtual card is one made up of controls from several cards in a frame and allocated a unique
slot number. Once the labels have been created they are displayed on the ‘Home’ page:
VisionWeb ‘Home’ page showing labelled slots and frame.
Configuration/Network
From the ‘Options’ page, clicking on the Configuration/Network link will bring up the Network
Setup page. If the installation includes more than one Indigo frame then the IP address may
need changing as all frames need a unique IP address. Enter the new IP address in the
Primary IP address
edit box and click on ‘Set’. In the example below, the IP address will be
changed to 10.0.0.205 from its default value.
The
Primary
Netmask
address can also be changed on this page if required. The Gateway IP
address should be set to 0.0.0.0 in the
Gateway IP address
box unless a router is in circuit, in
which case the correct gateway address should be entered. Click on ‘Reboot’ to implement the
changes and the web page should refresh itself showing the updated parameters.
VisionWeb ‘Configuration/Network’ page
Indigo 2AE and 2SE User Manual R1.17
30
27 February 2020
