Crystal Vision
Statesman
TANDEM HD-20 User Manual R1.4
44
24/05/2007
Presets and Headphones
The Presets and Headphones tab gives access to the Preset save/recall and headphone monitor
routing.
TANDEM HD-20 Statesman Presets and Headphones menu
Using Presets
Up to sixteen setups may be stored and recalled from Statesman, the card edge control or by
external GPIs. Presets store board setup data including operating configurations and option
card status. It is not possible to recall a preset if the option card configuration is different to
that established when the preset was created. The presets are numbered 1-16.
To store a preset proceed as follows:
•
Ensure ‘GPI controls preset recall’ is unchecked
•
Select appropriate preset by checking the Preset Number radio button
•
Click on ‘Store’ to save setup data into the selected preset
To recall a preset proceed as follows:
•
Select appropriate preset by checking the Preset Number radio button
•
Click on ‘Recall’ to recall setup data from the selected preset
‘GPI controls preset recall’ should not be checked whilst presets are being created or recalled
by this menu to prevent inadvertent GPI operation. Enable ‘GPI controls preset recall’ when
finished if required.
