nVision
Operation Manual
•
Page 7
.
X
Settings
Display contrast
can be adjusted in the
Settings
menu item.
This allows you to optimize your
nVision viewing experience to your ambient lighting conditions and backlight needs.
When
Contrast Adjust
is highlighted, use your right/left arrows to adjust and press
select
to capture
the new setting.
The
Screen Lock Password
feature will also be found in
Settings
, if enabled
in CrystalControl.
Prevent access to your nVision by protecting your device with a 4-digit keypad
lockout set in
CrystalControl. Highlight
Lock Chassis
and press the
select
button to lock your
nVision (the
icon will appear).
To unlock the nVision, simply enter the 4 digit password with
the arrow keys and
select
.
The correct password will allow you back into standard nVision op-
eration.
An invalid code will reject your attempt and allow you to enter another password.
In the event you lose the password, you will need to contact the factory for an unlock code,
which will remove the password protection.
.
X
Summary
Not sure of what modules or settings you have loaded in the nVision? The
Summary
item al-
lows you to view valuable details or settings in your chassis or module.
To view a specific mod-
ule summary you will need to choose
Chassis
,
Upper Module
or
Lower Module
. Items in this
section cannot be edited with the nVision chassis but may be modified in
CrystalControl.
The
specific information in the Summary screens are:
Chassis Summary: Serial Number, Firmware Version, Date/Time, Automatic Shutoff, Backlight
Shutoff, Logging Interval, Message Store, and module model and serial numbers.
Module :
Model, Serial Number, Firmware Version, Calibration Date, Calibration Due, Message
Store, Userspan, Available Units, and module specific information such as Temp. Coefficients
(RTD100), Base Resistance (RTD100), Lead Type (RTD100), and Zero Limit (PM)
With the exception of Model, Serial Number, and Firmware Version, all
features can be modified in
CrystalControl to optimize your nVision.
Summary of Contents for nVision Lab Reference Recorder
Page 1: ...C R Y S T A L engineering corporation Operation Manual Reference Recorder Lab Reference ...
Page 6: ......
Page 67: ......
